
Installation:
The cover can be installed manually or with special tool on the cables. After installation, make sure that the outer shell of the cover fits perfectly onto the
lower shell.
The cover should be fixed at both end points, and also per each 1 m.
The cover can be removed manually or with special tool, if necessary.
Material
Description | Appl. area |
ShoreA hardness |
Density (g/cm3) |
Tensile strength (N/mm2) |
Elongation at rupture (%) |
Heat stability at 200 °C min. |
MFI (190 °C, 21,6 kg) |
Stabilisating system |
---|---|---|---|---|---|---|---|---|
FL-462 black | Soft PVC | 62-64 | 1,21 | 10 | 366 | 31 | 45 | Ca/Zn |